Mini Cooper Key Fob Replacement
If you're in the market for a new key fob it's best to purchase one from the dealership. They're typically less expensive than the non-branded ones, and they offer many options, including the possibility of rolling down your windows.
They are also available online, but could not be compatible with your vehicle. These devices need to be programmed for your car. This can take some time and cost money.
Cost
Many newer cars come with a remote key fob that enables the driver to unlock and start the vehicle. These key fobs are expensive to replace if they're lost or damaged. In certain situations, you could need to replace the entire key fob. You can order an additional key fob from the dealer or from an online retailer.
Depending on the type of key you can also get a replacement at a locksmith or at an auto parts store. However, it's important to know that these keys have an integrated chip that connects to the car's system. This means that if you get an unbranded key fob it will not work properly in your Mini Cooper.
You can purchase an extra mini cooper key from a dealer for $150 per piece when you have a Gen 1 or 2. Locksmiths can replace your key for an amount that is less however it's better to have an extra. key mini can also get a non-remote key for $60 that will lock and unlock your vehicle.
GMW Perth, as a BMW and Mini Cooper Service Centre, is fully equipped to replace BMW or Mini Cooper Keys with genuine parts. It's not an easy task to lose your key but by replacing it you will ensure that your car isn't lost and ends up in the wrong hand.
Requirements
If you're considering replacing your key fob, make sure to buy one that is compatible with your vehicle. It's crucial to do this because the key fob serves a variety of functions. It can be used for opening and starting your vehicle. Additionally, certain vehicles require a specific fob size in order to function. If your new key fob is not the right size, it could not fit into the ignition and cause issues.
In general the key fobs that are sold at MINI dealerships are compatible with your vehicle. They are also cheaper than the ones you can purchase from locksmiths. If you're unsure about how to install a new key, you should leave it to an expert.
The key fob's battery must be replaced regularly. Luckily, the procedure is quite easy. The first step is removing the old battery from the case. To pull the notch at the top of your case, you'll need to use an object that is thin. After taking the battery out, replace it with the CR 2032. You can find these batteries at your local hardware store or in a supermarket.
The next step is activating the replacement key fob. This will connect your microchip with your vehicle. If you're not happy with this, you can take your vehicle to a nearby MINI dealer for assistance. You can also ask your local mechanic to do the same.
Compatibility
The key fob is a small plastic device, allows you to lock or unlock your vehicle. It transmits the radio frequency signal to the vehicle's receiver, which triggers a chime that signals you when the doors are locked or unlocked. This feature is standard in a majority of modern cars and can make driving more secure. If your key fob gets damaged, you'll need to replace it.
Key fobs can suffer damage from a variety of reasons. They can fail to function if they are dropped, stepped upon or even soaked. Most of the time, this causes the doors not locking or unlocking correctly. In addition, the buttons on the key fob can become sticky or misaligned due to frequent use.
One reason to keep an extra key fob to give it to your spouse or a driver who drives the car. This will allow each driver to have their own Driver profile and avoid any misaligned settings like mirror position, climate control or the position of the seat.
A high-quality replacement key fob will be equipped with the same FCC ID number and the same part as your original. This will ensure the new fob's integration with your vehicle's RKE system. The fob needs to be cut by a reputable locksmith to match the vehicle's ignition. It needs to be "unlocked" or "reflashed" in order that it can be programmed to your vehicle's system.
Installation
Modern electronic keys offer an array of security and convenience features you won't find in traditional mechanical keys. However, as with any other automobile gadget, the fobs will fail at times. If this occurs, you'll need to call a professional locksmith on mobile.
Test your key fob to determine if it requires a new battery. If the fob does not respond to pressing the lock or unlock button, it is most likely to be dead. The good news is, replacing the battery is a simple procedure. You can find batteries at hardware stores, online, and at big-box retailers. Read the owner's manual (which is typically available on the website of the automaker) for more specific guidelines.
The first thing you need to do is to remove the backup metal ignition key from the fob and set it aside in a secure location. Place the blade of a plastic pry tool or flathead screwdriver above the spot where the ignition key made of metal was. Take the cover of the rear off, and set it aside in a safe spot. Now, replace the old battery with a brand new CR2032 coin cell. Make sure that the positive (+) face is facing you, and then remove the cap from its place.